Cleaning and Flow Frame maintenance
In: Frequently Asked Questions
Viewed: 107,579 times
We haven't found the Flow comb itself needs cleaning if it stays in the hive - the bees do a great job of keeping it clean. If you remove Flow Frames from the hive and store them for a while they may need cleaning. You can do this by using hot water (just hot enough to melt wax, no hotter than 70 Celsius / 160 Fahrenheit). A hot water hose is good. Set the Flow comb to ‘cell open’ position, this allows the water to run quite easily through all parts of the frame.
We have designed the honey trough at the bottom of the frame so that any remaining honey can drip back into the hive for the bees to use. If the honey leak-back gap remains clear this works well; however, if the bees block it up some honey may remain in the honey trough after harvest. Clear the leak-back gap prior to harvest and inspect the honey trough. If the honey trough is dirty it can be cleaned from outside the hive using a bottle brush or something similar.
If you are storing your Flow Frames for any length of time outside the hive, ensure they are kept away from the light as the Flow frame plastic is UV sensitive. Store the frames in a cool, dry, dark location.
To discuss cleaning and maintenance of the Flow frames join the discussion on our forum